Specifications:
HUB-Bringing multiple port transponder.
Support up to 30 remote viewers per camera.
Email notification of events, motion detect and motion tracking.
Web based remote access using any java enable web browser.
Supporting Multiple Network Protocols: HTTP/TCP/IP/UDP/ STMP/DDNS/DNS/SNTP/DHCP/FTP.
Option to store images to an FTP server.
Block/black-list up to 256ip address.
Detailed event log with ability to sort and save.
Free multi-camera monitoring software.
Free icamview utility software.
One IP Camera Connect a extension
Support Up to 30 Remote Viewers for each camera
Allow Up to 8 User Accounts and Passwords
Infrared - Night Vision
UP to 20 FPS Performs High Quality Service to Multiple Users
Motion Detection Supports Upload Images to FTP & EMAIL
View with Browsers No Specific AP Needed
Remote Record and Snapshot Control on Web Page
Video Resolution : 640 x 480, 320 x 240, 352 x 288, 176 x 144
Video Adjust: Brightness, Contrast, Saturation, Hue
Image snapshot
Full Screen Monitoring
Pan/Tilt control
Patrol
Auto pan
Pan/Tilt Speed Control
Compression Format: MPEG
Motion Detection
Triggered Action: Mail, FTP
Pre/post Alarm
Security: Password Protection
Firmware Upgrade: FTP mode, can be upgraded remotely
Simultaneous Connection: Up to 25
Network Protocol: HTTP TCP/IP,UDP,SMTP,HTTP,FTP,DDNS DHCP,NTP
Camera: CPU: ARM9 32 bit RISC
RAM: 64MBR
ROM: 8MB Flash
One RJ-45 for 10/100 Fast Ethernet
Image Sensor: 1/3 CMOS, 380K Pixel
Lens: Fixed Focus, F=2.0/4 Glass, 1 Filter/Fl=6.0mm
Minimum illumination: F2.0/ 5 LUX
Angle: 60 degree
Video Out: 2
I/O: 1 in / 1 out
Pan Angle: 360 degrees
Tilt Angle: 180 degrees
Power Consumption: DC 5.3V/1A, 100~240V
Dimensions: 130(W) X 130(H) X 150(D)
Approved: CE / FCC